Pressure Washer Equipment

Pressure Washer Equipment - Graffiti Removal Made Easy

2012-01-24T23:26:00.000-08:00

Graffiti has always been a problem for contractors required to maintain clean building facades. Greasy, chemical laden graffiti damages the surface below. Graffiti can tarnish the look of a building and removing them often turns out to be a difficult and time consuming process. To make graffiti removal less tedious, Daimer® offers a range of power washer equipment for cleaning professionals and public works/infrastructure maintenance agencies.

Usually, high temperatures work where cold water does not. Graffiti removal can be sped up with the use of hot water. Many of Daimer®’s machines in their Super Max™ series feature temperatures as high as 330°F. Hot water breaks down the chemicals and grease that form the base of graffiti paint.

In addition to high temperature, the pressure washer equipment should have high pressure levels. High pressure water washes away impurities, ensuring faster and better cleaning. Machines such as the Super Max™ 12880 are able to reach pressure levels as high as 3000 psi. This machine, with temperatures as high as 330°F, offers an additional advantage: it can be trailer mounted. This is a very important factor when selecting pressure washer equipment for cleaning public infrastructure.

If you need to clean large surfaces, miles of roads and sidewalks or walls, and are facing the problem of water scarcity, Daimer® provides the solution. It offers pressure washer equipment that uses less water, and some machines such as the Super Max™ 6120LM have flow rates of only 0.5 GPM.

While electric pressure washers are among the more commonly bought pressure washer equipment, Daimer® also sells gasoline, propane, and diesel powered pressure washers. These machines are used in situations where electricity is not available.

To learn more about pressure washers and their applications, visit www.daimer.com.

Pressure Washer Equipment - the Right Choice for Aviation Maintenance

2011-11-17T22:48:00.000-08:00

The cleaning demands posed by airplanes are entirely different are entirely different from common vehicle cleaning. Using high-grade steam power cleaners and green chemicals will get a vehicle clean relatively quick. Airplanes, however, are considerably more difficult to clean, primarily due to the dust, grime, and dirt accumulated during long flights. Scrubbing, washing, and wiping are outdated cleaning techniques that are no longer practical when you need airplanes clean and gleaming in a couple of hours. To manage such challenging tasks, opt for powerful pressure washer equipment from Daimer®’s Super Max™ series.

The Super Max™ range of pressure cleaning machines from Daimer®, including the Super Max™ 12885 JF, is robustly constructed and durable enough to survive rough use for years. Good-quality, stainless-steel components ensure the reliability you need while working long hours on maintaining airplanes.

Until the launch of pressure washer equipment, cleaning professionals used steam cleaning systems for aviation maintenance jobs. However, these steam cleaners were not actually suitable for such tasks. The main drawback was the lack of pressure levels require for such heavy duty cleaning. Because pressure washer equipment features high pressure levels and high flow rates, these machines are perfect for maintaining huge airplanes.

The Super Max™ 12500 JF is an excellent choice for dealing with aviation maintenance activities. With pressure levels of 3500 psi and high steam temperatures of 226ºF, this pressure washer equipment efficiently dissolves and cleans off grease, dirt, grime, and other tough deposits accumulated on various parts of the airplane. Thanks to the tri-mode capabilities, these versatile power cleaners can generate cold water, hot water, or steam to meet your specific needs.

So, get this advanced pressure washer equipment from www.daimer.com and experience how easy aviation maintenance can be.

How to Buy Pressure Washer Equipment for Airplane Maintenance

2011-09-16T23:45:00.000-07:00

Airplane maintenance is one of the niche jobs handled with pressure washer equipment.Other cleaning machines are not as suitable for this task as power washers are. The mode of working of these machines suits the cleaning tasks. The output of these machines blasts away dirt and dust from hard surface. The job does not involve extraction of dirt since the impurities are washed away from the surface.

Experienced cleaning workers in the aviation industry know that only top quality pressure machines give the best results. The following are some tips on buying the right pressure washer equipment from Daimer® for cleaning airplanes.

Output Pressure
Output pressure is arguably the most important property of a power cleaner. Consider machines such as Daimer®’s Super Max™ 12885 JF for the job. Such pressure washer equipment features pressure levels of 3500 psi and temperature levels reaching 226°F.

Power Options
Daimer® offers pressure washer equipment specially made for cleaning airplanes. These machines are portable, and as an added convenience run on JP5 or JP8 jet fuel types.

Daimer®, a major distributor of cleaning units, provides excellent pressure washer equipment for the aviation sector. To read more about the machinery offered, visit www.daimer.com.

Pressure Washers - More Reasons To Choose Gas-Powered Ones

2011-09-05T23:16:00.001-07:00

To tackle the extremely challenging cleaning operations in industrial areas, you must be equipped with powerful cleaning machines. Many professionals turn to advanced pressure washer equipment powered by gas for added mobility. While electric-powered versions of pressure cleaners have to be connected to electrical outlets, gas-run versions do not, so they offer more mobility. Let us look into the other benefits of choosing gas-powered pressure cleaning machines.

The Super Max™ range of pressure washer equipment available from Daimer® is notable for a number of reasons. The mobile nature of these power cleaners is further enhanced by their compact designs and portable configurations. To help maintain vast areas without worrying about topping up with water, these power cleaners come with huge, truck-mountable water tanks.

When planning to purchase pressure washer equipment, you will naturally expect it to score high in terms of durability, reliability, and functionality. This is why you must check out the Super Max™ 12500 GE. With robust construction and highly advanced cleaning technologies, this gas-run pressure washer equipment powered by an 18-HP gas engine has been created to deal with the demands of commercial and industrial cleaning applications.

The Super Max™ 12500 GE is also remarkable for its high pressure levels of 3000 psi and high flow rates of 5 GPM. While managing contracted cleaning assignments in vast industrial areas, maintenance professionals prefer using highly mobile cleaning machines. With this requirement in mind, the Super Max™ 12500 GE has been designed with trailer-mountable features.

Check out the entire range of gas pressure washer equipment at www.daimer.com.

Pressure Washer Equipment for Aviation Maintenance

2011-08-22T23:59:00.001-07:00

Pressure washer equipment is used for detailing cars, trucks, boats and RVs. These machines use nothing more than the power of pressurized water to remove various kinds of deposits, ranging from road dust to algae, bird spatter and bug stains. Pressure washer equipment can also be used to clean airplanes. This can be an extremely daunting task, as these flying machines are not only large in size, their maintenance is also crucial to ensure the craft’s safety and performance. When washing down an airplane, an experienced eye will also be able to spot cracks, leaks or corroded areas that might become a problem if it isn’t dealt with immediately.

Pressure washer equipment from Daimer® is well suited to the many unique cleaning challenges of airplane maintenance. Planes pick up a lot of bug spatter, dust, and different kinds of debris while flying. These can often clog crevices and even accumulate in certain areas. This can reduce the fuel efficiency of the plane, as it makes it heavier. Using conventional cleaning methods to deal with airplane cleaning can be time-consuming and may miss the debris hidden in hard-to-reach areas. A pressure washing unit can efficiently reach areas a user may not be able to reach with a mop or sponge.

Pressure washer equipment, such as Daimer®’s Super Max™ 12885 JF, is powered by either JP5 or JP8 jet fuel. To melt away substances like grime or grease, this machine reaches temperatures up to 226°F. Best of all, this cleaning can be done without relying on any kind of harsh chemical cleaning agents. Learn more about pressure washer equipment by visiting www.daimer.com.

Benefits of Electric Pressure Washer Equipment

2011-07-28T23:42:00.000-07:00

Anybody with good searching skills on the internet can easily understand that a number of different pressure washer equipment is available: electric machines, gasoline-powered machines, hot water machines, steam pressure washers, and others. Are there any real functional differences between the machines or is it just the marketing spin of the distributors?

Certainly, there is a certain criteria by which pressure washing machines are classified. One such criterion is power source. These machines are broadly classified into two categories based on the source of power: electric machines and machines powered by fuel. This post explains the various benefits of electric pressure washer equipment.

Low Noise
As far as pressure washers are concerned, the type of power source does not affect the cleaning efficiency of the machine. Both electricity-powered machines and gasoline-powered machines from Daimer® have the same cleaning power, provided both have the same output pressure and temperature specifications. The difference lies in how they operate. Electric pressure washer equipment produces much less noise than fuel powered machines, which makes them more suitable for indoor cleaning.

No Exhaust
An even more vital advantage is that these machines do not produce exhaust. Machines powered by a combustion engine do emit fumes from the fuel burning. The lack of exhaust and low noise make electric pressure washer equipment suitable for indoor cleaning.

Daimer®, a reputable supplier of cleaning machines, offers a number ofmodels of electric pressure washer equipment in their Super Max™ series. For more details about these and other cleaning machines from the company, log on to www.daimer.com.

Pressure Washer Equipment – The Perfect Machines for Aviation Maintenance

2011-07-19T23:49:00.000-07:00

The cleaning requirements of vehicles and airplanes are worlds apart. A good steam pressure cleaner and some cleaning chemicals will help clean a car in a couple of hours. Airplanes that accumulate plenty of dust, dirt, and grime during long journeys can be more difficult to maintain. If you are wondering about a way to get the entire aircraft clean without spending hours on washing, wiping, and scrubbing, you will be glad to discover that pressure washer equipment has been designed specifically for such applications.

High grade pressure washer equipment in the Super Max™ range from Daimer® are ruggedly constructed versions that offer reliable performance even when used continuously for long periods. Until this breakthrough, workers had to manually clean and maintain planes. The launch of pressure washer equipment solved these issues and made such maintenance jobs simpler.

Super Max™ 12885 JF is super excellent pressure washer equipment suitable for aviation maintenance jobs. By attaining steam temperatures as high as 226ºF and pressure levels of 3500 psi, this pressure cleaner helps dissolve and wash off grime, dirt, grease, and other stains on different parts of airplanes. These versatile power cleaning machines are also endowed with triple function capabilities. As a result, they can function independently as steam pressure washers, cold water pressure cleaners and hot water power washers. Additionally, the 12885 JF runs on jet fuel for easier convenience.

Maintaining airplanes is unbelievably easy and fast if you use the powerful yet user-friendly pressure washer equipment from www.daimer.com.

Benefits of Pressure Washer Equipment

2011-07-06T05:27:00.000-07:00

Pressure washer equipment is often reserved for the most difficult of cleaning tasks, for example, heavy-duty industrial degreasing. One of the reasons for their efficiency in handling tough cleaning tasks is their high output pressure levels. Pressure levels of pressure washing machines from Daimer® range from 750 to 8000 psi. The following are some of the main benefits of using pressure washer equipment with high pressure levels.

High Efficiency
Pressure washers work by pumping a high pressure output, onto hard surfaces.
The output washes away dirt and impurities present on the surface. The efficiency of the cleaning process partly depends on the pressure level of output flow. Generally, higher pressure levels means more forceful cleaning power. However, temperature settings also play an important role as well.

Quicker Cleaning
Pressure washer equipment with high pressure levels performs the cleaning job quickly as the high pressure output blasts away the impurities present on the surface within no time. The only limitation of using these machines is the nature of surface. If the surface is not hard enough to withstand the high pressure output, then it is not advisable to use pressure washer equipment with high pressure levels. However, these are excellent choices for cleaning hard and sturdy surfaces, such as concrete floor, pavement, and hard metal surfaces.

How to Choose
To get the best out of these machines, one must choose pressure washer equipment from a reputable distributor such as Daimer®. For more details, visit www.daimer.com.

Gas Powered Pressure Washer Equipment for Cleaning on the Go!

2011-06-08T23:25:00.000-07:00

Many models of pressure washer equipment are used to tackle an array of indoor cleaning jobs. In commercial and certain industrial areas, electrically-powered stationary pressure washing machines are used to clean things like machinery or even to wash down the floors. Some cleaning jobs may have special requirements. For instance, tasks like removing graffiti or cleaning agricultural equipment may require pressure washer equipment that is portable and can run efficiently without electricity. In these cases, gas powered pressure washer equipment is an ideal option.

Daimer® understands that a large number of outdoor cleaning tasks require the cleaning technology of pressure washer equipment. Instead of relying on harsh chemical cleaning agents, these units use the power of pressurized water to forcibly lift and wash away different kinds of dirt and debris. However, some areas may not have ready access to electricity supply or may simply have to cover a lot of ground. In these cases, gas-powered pressure washers, such as Daimer®’s Super Max™ 12500 GE, are ideal since they allow the user to move around freely while working. This model, along with many others, can also be used as cold water, hot water and steam pressure washing machines. They offer formidable pressure levels and water flow rates to deal with the toughest kinds of cleaning jobs.

Gas powered pressure washer equipment can also be used in certain indoor locations as well. While these units do generate exhaust fumes, they can be used in areas that have proper ventilation. More information and resources on pressure washer units can be found at www.daimer.com.

Pressure Washer Equipment – Benefits of Electric Versions

2011-06-01T23:27:00.001-07:00

Pressure cleaning machines powered by fuels are widely used by cleaning professionals today. However, you must be aware of the drawbacks of such power cleaners that run on fuels. For example, if you possess a pressure cleaner that runs on propane and propane is not readily available in your area, it can hinder your use. Another drawback is that fuel-powered pressure washing machines give out toxic fumes, which can prove dangerous in poorly ventilated areas. For this reason, more people are now turning to electric-powered pressure washer equipment. Here is a look at the benefits of these electric pressure washers.

The presence of fuel tanks makes fuel-powered versions large and heavy. On the other hand, pressure washer equipment powered by electricity is light-weight, compact and portable. Electric versions are also eco-friendly since they do not emit toxic fumes and operate with less noise. Best of all, quality built electric-powered pressure cleaners from Daimer® do not incur huge maintenance costs.

Daimer® presents advanced models of pressure washer equipment such as the Super Max™ 6000 that is powered by electricity. By attaining pressure levels of 750 psi, this power cleaner simplifies tough cleaning jobs. This is also a tri-mode version that offers you the benefits of hot water power cleaner, cold water power washer and steam pressure washer equipment in a single unit. It can generate steam at high temperatures of up to 330ºF and hot water at temperatures ranging from 180ºF to 210ºF.

To enhance the cleaning action of this pressure washer equipment, you can add detergents through the siphon hose. Detergent-added water and high pressure levels combine to form a powerful cleaning force. Visit www.daimer.com for more details on electric pressure washers.

Pressure Washer Equipment and Tri-Mode Capabilities – The Killer Combo

2011-05-10T23:56:00.000-07:00

When purchasing pressure washer equipment, it is important to ensure its durability, performance, and adherence to safety standards. This is why it would be a good idea to check out pressure cleaning machines from Daimer®. These solidly built pressure cleaners equipped with advanced technologies guarantee outstanding cleaning results in commercial and industrial environments.

Such electric pressure washer equipment as the Super Max™ 12820 from Daimer® is ideal for managing challenging cleaning tasks. Its tri-mode functions allow it to work as a cold water pressure cleaner, a hot water pressure cleaner, and steam pressure washer reaching temperature levels up to 330°F. Flow rates of 3 GPM and pressure levels of 1500 psi enable it to offer superb cleaning efficiency.

Pressure washer equipment from Daimer® with tri-mode capabilities is useful for cleaning a number of different areas. For example, non-heated functions can be used for lightly cleaning dirt and grime from floors and walls. To remove grease from machinery or vehicles, steam options can be used.

Daimer® also includes electric pressure washer equipment with both Long Hose Technology and AST® technology. Long Hose Technology allows operators to reach up to 300 feet away without having to move the machine. With AST® technology, the machine will automatically shut off when the machine is not in use for 30 seconds. This eliminates the need to go back and forth from the machine and helps reduce wear and tear.

Check out more on pressure washer equipment at www.daimer.com

Tips To Buy Pressure Washer Equipment for Aviation Maintenance

2011-05-04T00:19:00.000-07:00

Pressure washer equipment is widely preferred for maintaining aircrafts and airplanes. These machines are powerful and durable. Not many cleaning machines are as suitable as these are when it comes to cleaning hard and rough surfaces. The main weapon these machines wield is their high pressure levels. The output pressure of these machines can vary up to 8000 psi, based on the model. However, buying the pressure washer machine with the highest pressure level may not always work in aviation maintenance. So, how should a person who is not familiar with the aircraft maintenance field proceed? The following tips will help.

Low Flow Rate
One of the most important things in the cleaning process of airplanes is choosing a machine fit for the cleaning task. For instance, the Super Max™ 12885 JF features pressure levels of 3500 psi for eliminating the tough dirt and grease often associated with airplanes. With steam pressure levels up to 226°F, such pressure washer equipment can eliminate grease from engines, wings, wheels, and more. In addition, the 12885 JF runs on jet fuel, commonly found at airports where planes are cleaned. For this reason, jet fuel powered commercial pressure washer equipment is commonly used for maintaining planes.

It is also important to buy machines from quality suppliers, such as Daimer®. For more details about pressure washer equipment from Daimer®, visit www.daimer.com.

High Pressure Levels and Low Flow Rate

2011-04-12T23:56:00.000-07:00

Most conventional pressure washer equipment utilizes a combination of high pressure levels and high flow rates. This works well in areas with no water scarcity or disposal issues. In some industries (for example, marine cleaning and car detailing), however, high water consumption is not permitted. Even if you do manage to find an adequate water supply, you would face the problem of waste water disposal, particularly if use thousands of gallons of water for cleaning.

Keeping these problems in mind, Daimer® offers a range of low flow pressure washer equipment. These machines maintain moderately high pressure levels, sufficient for most commercial cleaning applications without damaging surfaces. To eliminate problems related to excess water consumption, Daimer®’s low flow pressure washer equipment has flow rates as low as 0.5 GPM. The Super Max™ 6120LM, with a pressure level as high as 1000 psi and flow rate of only 0.5 GPM, offers considerably higher water efficiency than ordinary pressure washing systems. This machine also features high steam temperature (300°F) for adequately removing algae, barnacles, grease, oil, and other dirt from boats and dockyards without using too much water. Thanks to its suitable pressure level, this pressure washer can be used for safely cleaning cars and boats.

Daimer® also sells pressure washer equipment specifically designed for the car wash industry. The Super Max™ 6120SCW and Super Max™ 6230SCW offer pressure levels of 1000 psi, temperatures as high as 300°F, and flow rates measuring 0.5 GPM. This machine may be used for removing frost, grease, dirt residue, and plant sap.

Daimer® also offers pressure washer equipment with higher flow rates, used for industrial cleaning purposes. To go through Daimer®’s inventory of commercial pressure washers, visit www.daimer.com.

Tips to Buying Pressure Washer Equipment for Aviation Maintenance

2011-03-22T23:16:00.000-07:00

Pressure washer equipment is used for hard surface cleaning and a host of other cleaning tasks as well. The high output pressure and flow rate are suitable for cleaning floors, industrial machines, and other similar hard surfaces. A common use of pressure washer equipment is cleaning aircrafts. The following are some tips that can help someone who wants to purchase cleaning machines for airplane maintenance.

Choosing a Machine
The first thing to check when buying any type of cleaning machine, including pressure washer equipment for aircraft maintenance or auto detailing, is that the machine comes from a reputable company such as Daimer®. Daimer® offers pressure washers with durable construction and advanced features. Their wide variety of cleaning machines ensures the customer can choose a machine that best fits their needs.

Daimer® offers pressure washer equipment specifically for the aviation industry. The Super Max™ 12885 JF features pressure levels of 3000 psi and flow rates of 5 GPM. What makes this machine special is its ability to run on jet fuel, which is already commonly found at airports and storage areas. The 12885 JF also has a heated output with steam temperatures reaching up to 226°F for eliminating tough dirt and grime commonly accumulated on planes.

Daimer®, a sought-after supplier of cleaning machines, provides pressure washing equipment built to withstand demanding cleaning applications. For further details regarding these machines, visit www.daimer.com.

Tips to Make Pressure Washer Equipment Work Better

2011-03-02T22:51:00.000-08:00

Pressure washer equipment has a hard-earned reputation as an extremely powerful cleaning machine. The high output pressure, high output temperature, and practical flow rate of these machines all lead to a powerful output capable of removing almost any kind of dirt or grime from hard surfaces.

Experienced users know that the efficiency of these machines can still be improved. The following are some tips to make pressure washer equipment work faster and smarter.

Buy from Reputable Suppliers
A reputable supplier such as Daimer® retails only quality machines with durable construction. Having steel powder-coated, chip resistant casing will help protect the machine from the wear and tear of regular use. Also make sure the machine is suitable for the job to be completed. Using machines with improper specifications can make the job more difficult to complete.

Use Multiple Guns
Pressure washer equipment with multiple scatterguns makes the work easier and less cumbersome. Multiple guns are handy not only because a damaged gun replacement is always available, but that both the guns can work together and cover a particular area in half the time.

Daimer®, a reputable distributor of cleaning machines, offers pressure washer equipment with multiple scatterguns and durable components.

The company provides machines with sophisticated technologies to make the cleaning process more efficient and faster. Visit www.daimer.com to learn more about the cleaning machines they have to offer.

Why You Should Use Pressure Washer Equipment on Agricultural Equipment

2011-02-18T00:36:00.001-08:00

Pressure washer equipment is often used to tackle very tough cleaning activities like heavy degreasing. They are also the best choice when it comes to cleaning agricultural equipment. Today, the majority of farm and agricultural work has become mechanized to keep up with changing times and rising demands. Apart from that, more advanced machines have taken the place of agricultural tools that have now become obsolete. In order to ensure these expensive farming machines work at their optimum levels and last for years, they need to be cleaned on a regular basis. Pressure washer equipment is best suited for these kinds of cleaning jobs.

Daimer® understands the unique challenges of cleaning agricultural equipment. Many of these machines are huge in size and this thorough cleaning can only be done using pressure washer equipment. Such equipment will complete the task effectively and quickly. Many units are available in fuel-powered options, which is convenient when it comes to cleaning machines that are always used outdoors. Such machines as the Super Max™ 12500 GE is powered by gasoline and features pressure levels of 3000 psi and steam temperatures up to 330°F. These pressure washers are tri-mode machines, including cold water, hot water and steam pressure washing modes. The cold water mode will be sufficient to remove debris like dust and husk deposits. The hot water and steam pressure washer equipment may be more suited to other tasks like removing dry, sticky mud, oil, and grease deposits.

Daimer®’s Super Max™ pressure washers come in varying pressure levels and water flow rates. This is useful, particularly when cleaning machines may be sensitive to strong pressure levels. Machines with lower water flow rates can be used in areas where water drainage may be in issue. Click on www.daimer.com to get more information on pressure washer equipment.

Pressure Washer Equipment for Cleaning Streets, Sidewalks, and Public Grounds

2011-02-03T21:23:00.001-08:00

Pressure washer equipment may be categorized into heated and non-heated machines. Power washers with a heating mechanism are capable of generating high temperatures ideal for washing away grease, dirt, and even graffiti. There are various power methods available, including both electric powered and fuel powered machines that run on gasoline, propane, diesel, and even jet fuel. Fuel powered machines are suitable for use in outdoor areas where electricity is not available. The Super Max™ 12500 GE, with 3000 psi pressure level and temperature of 330°F, is the ideal pressure washer equipment for cleaning large areas. The Super Max™ 12500 DE offers similar pressure levels and temperature, but with a diesel engine. Both these machines are trailer mountable for covering large tracts of sidewalks, roadways, and public grounds, often running into several miles.

If you want to save on costs or fuel charges, buy non-heated pressure washer equipment. Daimer®’s cold-water pressure washers are powerful machines with high-pressure levels and flow rates. The strong spray emitted from the nozzle washes away most dirt from concrete, stone, metal, granite and paved/tiled surfaces. The Super Max™ 8900C-640 runs on gas and offers pressure levels of 3000 psi while the Super Max™ 8720 is an electric machine with a pressure level of 2000 psi.

Pressure washer equipment from reputable suppliers such as Daimer® will ensure your machine is built of quality parts and will last during constant cleaning. Visit www.daimer.com for more information on Daimer®’s pressure washer equipment and green detergents.

How to Make Pressure Washing Equipment More Powerful

2011-01-16T21:35:00.000-08:00

Pressure washer equipment can be very effective for use in both commercial and industrial areas. These systems employ pressurized water to forcibly lift and remove sediments and debris from different surfaces. Using varying pressure levels and water flow rates allows the user to tackle a range of cleaning applications, ranging from light to heavy cleaning jobs.

Pressure washer equipment from Daimer® features a wide variety of technologies and features for various cleaning applications. Cold water, hot water, and steam pressure washer equipment are available for tackling different cleaning tasks, ranging from car detailing to heavy industrial degreasing. Such systems in Daimer®’s Super Max™ series use highly pressurized water for eliminating tough dirt, grime, grease, and other debris from hard surfaces.

Daimer® understands that pressure washer equipment often used for mor than one cleaning application. For this reason, a variety of different models with technologies and features are available. For instance, Daimer® offers many machines with Long Hose Technology for reaching up to 300 feet away without moving the machine. To compliment this feature, systems such as the Super Max™ 7000 AST feature Automatic Shut-Off Technology for operators using the machine over large areas. This technology automatically shuts off the machine when not in use for 30 seconds.

Click on www.daimer.com to learn about pressure washing equipment and other cleaning machines.

Pressure Washer Equipment for the Aviation Industry

2011-01-03T00:56:00.000-08:00

The aviation industry has diverse and stringent cleaning requirements. For cleaning airports, runways, hangars, and airplanes, machines that are versatile and powerful are needed. Daimer®’s pressure washer equipment is constructed of quality materials and built to withstand rugged cleaning operations.

Pressure washer equipment for the aviation industry should be portable. Choose machines that are trailer mountable. Electric pressure washers like Super Max™ 6000 can be used for indoor and outdoor cleaning. It has a moderate pressure level of 750 psi for eliminating dirt and grease from planes.

The Super Max™ 12840 is also an electric machine, but has higher pressure levels (2000 psi) suitable for cleaning outdoor areas and hangar floors. Daimer®’s commercial pressure washer equipment is housed in powder coated steel to help prevent chipping and chemical corrosion, and can operate continuously for quick and effective cleaning.

Operators may use non-electric pressure washer equipment for cleaning outdoor areas and airplane exteriors. The Super Max™ 12880 DE, for example, runs on diesel. This powerful machine has pressure level of 3000 psi and flow rate of 5 GPM. Daimer® also offers pressure washers that run on propane or gasoline. Due to exhaust fumes, non-electric machines are not recommended to be used indoors.

Daimer® also offers pressure washer equipment powered by aviation fuel. These systems are designed to be used with JP5 and JP8 fuel types. Because aviation fuel is often easily accessible around airports, this makes finding fuel more convenient.

Such pressure washing equipment as the Super Max™ 12885 JF features pressure levels of 3500 psi, flow rates of 5 GPM, and steam temperatures up to 226°F. Such powerful combinations help eliminate grease, mud, dirt, and other commonly found debris on planes. Visit www.daimer.com to learn more about what products Daimer® offers for the aviation industry.

Latest Trends in Pressure Washer Equipment

2010-10-22T05:19:00.000-07:00

Pressure washer equipment is more defined for each industry. New features are added and new technologies are introduced regularly to make the cleaning process for virtually all applications easier and more efficient. The following is an overview of some of the latest technologies of pressure washer equipment.

Automatic Shutoff

Daimer®, a top supplier of cleaning products, offers pressure washers with AST® technology. This technology allows the user to control the on and off functions of the machine through the trigger gun. The machines will automatically turn off if there is no output flow through the machine for 30 seconds. Operators can switch on the machine by using the trigger gun as well.

This technology is available for many of Daimer®’s electric pressure washers in the Super Max™ series and is particularly useful when cleaning large buildings and public places like parks and stadiums. Automatically shutting off the machine also helps prevent wear and tear.

Long Hose Technology

Long Hose Technology is often used along with the AST® feature. Daimer®’s Long Hose Technology, a feature of all Super Max™ machines, allows operators to use the machine up to 300 feet away without having to actually move it. Often used with stationary machines, this feature can help operators keep the machine in a fixed place, while still reaching other areas.

Another use of Long Hose Technology is with pressure washers driven by a fuel engine. These machines generate exhaust, which can present a problem when used indoors. Using Super Max™ systems with Long Hose Technology enables operators to place the system in an exhaust-friendly location, such as outside, and reach indoor applications with up to 300 feet of pressure hose.

Tri-mode Technology

Tri-mode technology has made pressure washers highly versatile. These machines can provide three types of temperature output: non-heated at room temperature, hot water up to 210°F, and steam temperatures up to 330°F. With all three options, users can operate the machine based on the task at hand.

Daimer® offers tri-mode pressure washer equipment in the Super Max™ series. To read more about these machines and other cleaning products, visit www.daimer.com.

Role of Pressure Washer Equipment in Aviation Maintenance

2010-09-21T04:58:00.000-07:00

Pressure washer equipment plays a big role in the fleet maintenance of aviation companies. Lack of cleanliness can affect both the safety of the aircraft and the image of the company. Sometimes minor problems may turn into issues that are more serious. For this reason, it is important to select the best pressure washer equipment for cleaning aircrafts.

The following are some tips on choosing pressure washer equipment for maintenance of airplane fleets.

Know the Machine

Pressure washers are extremely powerful machines. Top quality, heated pressure washer equipment can provide output pressure levels up to 3500 psi. These machines pair high hot water and steam temperatures with high pressure levels to provide maximum cleaning power for aviation applications.

It is also better to choose machines specifically made for aircraft maintenance. Daimer®, a leading supplier of cleaning equipment, offers the Super Max™ 12885 JF pressure washer specifically made for the aviation industry. In addition to pressure levels of 3500 psi, flow rates of 5 GPM, and temperature levels up to 226°F, the 12885 JF is both powered and heated by JP5 or JP8 jet fuel, making this machine the best pressure washer equipment for the aviation industry.

Use Carefully

Cleaning workers must take precautions when using these machines. The extreme pressure levels of these machines may damage the aircraft or operator if not used correctly. In addition, soft interior surfaces of the aircraft, such as seat upholstery, should not be exposed to the output. For such applications, use of an XTreme Power® carpet cleaner is advised.

It is important to use pressure washer equipment from reputable suppliers such as Daimer®. For more information regarding their specialized pressure washers for flight maintenance, visit www.daimer.com.

Categorizing Pressure Washer Equipment

2010-09-01T03:14:00.000-07:00

Pressure washer equipment can be classified into many categories. You can divide these machines based on output temperature, source of power, and mobility, amongst other specifications. The following is an overview of various classifications of pressure washer equipment.

Temperature

There are three kinds of machines based on output temperature: cold water machines, hot water machines, and steam pressure washers. Cold water machines provide the output at room temperature, hot water machines up to 210°F, and steam pressure washers up to 330°F. Higher temperatures translate to greater cleaning power for the most demanding applications. For added convenience, Daimer® has several pressure washers with tri-mode capabilities allowing the operator to have all three features available with one machine.

Source of Power

Pressure washer equipment is powered by various different sources. In general, these can be classified into two sources: electric motor and combustion engine. Electric machines, as their name implies, are powered by an electric motor that derives energy from a source of electricity. Machines that are powered by a combustion engine use fuels, such as gasoline, propane, or diesel for generating energy.

In general, fuel powered pressure washers are used outdoors where there is adequate ventilation and no noise constraint. Electric machines are mostly used indoors because they produce less noise and no exhaust fumes. However, fuel powered machines can be used indoors if there is proper ventilation and electric machines may be used outdoors with a generator or if an electrical supply is available.

Mobility

In terms of mobility, pressure washer equipment can be classified into two categories: stationary machines and mobile machines. Mobile machines are generally used outdoors because of their easy portability around large areas such as buildings, parks, and parking garages. Mobile systems are also beneficial indoors, in vast industrial buildings and other large indoor facilities.

For those with stationary machines or fuel powered pressure washers that need to be used indoors, Daimer® offers pressure washers with their Long Hose Technology, which allows operators to reach areas up to 300 feet away.

Daimer®, a premier distributor of cleaning products, offers pressure washer equipment ideal for almost any cleaning job. For more details, visit www.daimer.com.

Pressure Washer Equipment: Are High Pressure Levels Important?

2010-08-15T23:25:00.000-07:00

High pressure levels make pressure washer equipment ideal for highly demanding cleaning tasks. High water pressure generated by the machine has enough force to remove dirt from hard surfaces quickly and easily, rather than spending large amounts of time scrubbing and wiping. It is important to understand the value of high pressure levels when choosing a machine.

Pressure washer equipment by Daimer® can reach pressure levels as high as 8000 psi. Most pressure washer equipment with very high pressure levels use cold water. Such high pressure levels, however, are not recommended for certain applications, such as car detailing, washing walls, or cleaning machinery. While high pressure levels may not be ideal for applications, a mix of several other features are essential when choosing pressure washer equipment for your factory, store, or contract cleaning business.

High temperatures, for example, can compensate for lack of very high pressure levels. Degreasing operations are best performed using hot water or steam pressure washers. These high temperatures also greatly increase cleaning power for applications where high pressure levels may cause damage, as in auto detailing. Unless used along with a green cleaner, such as Daimer®’s Eco-Green® Ultra Power Degreaser, cold water pressure washers will harden the grease and make it more difficult to remove. Hot water or steam pressure washers melt grease and wash it away. Though steam pressure cleaners do not require a green degreaser, the degreasing process can be enhanced with the addition of an Eco-Green® solution.

Restaurants, hotels, car detailing businesses, and other businesses can greatly benefit from tri-temperature systems. These machines can be operated as cold water, hot water, and steam systems depending on the application. Chief among these types of pressure washers are Daimer®’s Super Max™ 6000 with 750 psi pressure level and Super Max™ 9000, which can reach pressure levels as high as 1500 psi. Daimer® also supplies other Eco-Green® chemicals such as Parts Washer & Cleaner, Car Wash, and Deodorizers.

Visit www.daimer.com to find out more about their pressure washer equipment and their varied features.

Pressure Washer Equipment – High Pressure Levels Make Cleaning Easy

2010-07-28T05:24:00.000-07:00

Good pressure washer equipment uses consistently high pressure levels for achieving maximum cleanliness in minimum time. Pressure washer nozzles eject a stream of water at high pressure. This powerful water jet blasts dirt off the surface.

Pressure washing may also use high temperatures for removing grease, sugar, and proteins. Organic matter and oil tend to coagulate at room temperature. Heat melts them and the spray of water washes away the residue. While pressure levels alone create a powerful force, heated machines allow for quicker and easier cleaning.

Pressure washer equipment also reduces the need for detergents. High pressure levels can remove most dirt, including layers of chemicals or grease, using the mechanical force of the water spray. In some instances where detergents are necessary, pressure washer equipment from Daimer®, such as the Super Max™ 9000, are equipped with a siphon-type chemical application technology. This allows the user to spray detergent on the surface while cleaning to enhance cleaning power and speed up the cleaning process further.

Not all commercial/industrial applications require extremely high pressure levels. Machines such as the Super Max™ 15900 have pressure levels as high as 3000 psi and are ideal for cleaning factory floors and manufacturing/processing plants. However, these high pressure levels can damage certain surfaces such as antique wood, car exteriors, and bricks. Machines such as the Vapor-Flo® 8025, with pressure levels of 1450 psi and 0.4 GPM flow rate, are ideal for pressure washing cars, boats, SUVs, and trucks. Visit www.daimer.com for more information on pressure washer equipment featuring varied pressure levels.

Benefits of Gas Powered Pressure Washer Equipment

2010-07-07T05:11:00.000-07:00

There are many types of pressure washer equipment available on the market. These include gas powered machines, propane powered machines, diesel powered machines, and electric machines.

Most fuel powered machines work very similarly. The main part of these machines is a pump that is powered by a combustion engine, where a fuel is burned to derive energy. On the other hand, in electric power washers the pump is powered by an electric motor.

Each type of machines has its own advantages. The following are some of the advantages of gas powered pressure washer equipment.

Portability

The greatest advantage of gas pressure washer equipment is their portability. Gasoline is easily available in most places and is relatively inexpensive when compared to other fuels. As a result, these machines can be used anywhere gasoline is available.

Portable machines are either attached with wheels or mounted on trucks or trailers. If you are transporting the machine frequently across long distances, a trailer mounted system may be ideal.

Cleaning Power

These machines can provide very high pressure levels and temperature settings. The pressure level can reach as high as 8000 psi and temperature levels up to330°F, depending upon the model. Gas pressure washer equipment can be used for both heavy duty industrial degreasing and commercial cleaning purposes.

It is important to select the right machine to achieve the complete benefit of gas powered pressure washers. Daimer®, a top distributor of cleaning products, offers high quality pressure washer equipment. For more details, visit www.daimer.com.

Pressure Washer Equipment And Green Chemicals – A Powerful Combination

2010-05-17T04:19:00.000-07:00

Powerful pressure washer equipment supplied by Daimer® is known for ability to effectively clean surfaces without having to devote large amounts of time to the project. In addition, this exceptional cleaning action can be further enhanced by using Eco-Green® green chemicals from Daimer® Here are a few examples of how you can combine pressure cleaners and green chemicals.

Trying to remove graffiti from concrete walls is a tough and time-consuming task. Because spray paint is quickly absorbed by concrete surfaces, you have to spend hours scrubbing off the graffiti. Now, thanks to Eco-Green® Graffiti Remover, it is unbelievably easy to remove graffiti. When used along with pressure washer equipment, the nano-sized particles in these green chemicals penetrate concrete surfaces and remove the traces of graffiti.

Cleaning grimy or stained concrete surfaces is another difficult task that demands the use of advanced cleaning machines. The Super Max™ range of pressure washer equipment offers outstanding cleaning results when combined with Eco-Green® Concrete Cleaner with Rust Stain Remover. This plant-based, non-toxic, and environment-friendly green chemical effectively eliminates tough rust stains, grime, grease, and dirt from concrete surfaces.

Pressure washer equipment designed for truck detailing jobs easily blast away deposits like grease, road tar, dirt, tree sap, bugs, and grease on different surfaces like glass, tires, and vehicle exteriors. The powerful cleaning action of these truck detailing machines can be enhanced by using Eco-Green® Truck Wash. This green chemical instantly softens hardened deposits and makes it easy to clean them off.

Learn more about pressure washer equipment and green chemicals at www.daimer.com.

How to Select Pressure Washer Equipment

2010-04-06T02:39:00.000-07:00

A number of businesses now turn to pressure washer equipment for industrial degreasing applications. These machines are powerful enough to eliminate tough grease from machinery, floors, and other areas.

One has to consider many factors while selecting pressure washer equipment for heavy duty industrial degreasing jobs, such as power levels, temperature options, and special technologies to make sure the machine not only works efficiently, but also lasts longer.

Power

The power of pressure washer equipment is determined by its output pressure level and flow rate. Output pressure levels can vary up to 8000 psi, and the flow rate can vary up to 8 GPM (or gallons per minute), depending on the model. The higher the pressure level and flow rate the higher the output power of the machine.

Temperature

Pressure washer equipment can be classified into three categories based on the output temperature: cold water, hot water, and steam machines. Cold water output means the output is at room temperature, and hot water output means the output is at 210°F. The best machines for industrial degreasing are steam pressure washers, which provide output at 330°F. Temperature levels also influence power; as temperature increases, power increases.

For operators experiencing different types of applications, a tri-mode system from Daimer Industries® would be best. These machines offer the benefits of all three options by enabling operators to attain cold water, hot water, and steam temperatures, depending on the application.

Technology

A special technology that makes the cleaning process with these machines easier is AST® technology. Machines equipped with this technology can automatically switch off the motor and pump when there is no output through the scatter gun for over 30 seconds. This makes the cleaning process easier by reducing trips back to the machine during breaks, and prolongs the life of the machine by reducing wear.

This technology is a special feature of electric pressure washer equipment from Daimer®, a premier supplier of cleaning machines and products. For more information about the cleaning systems offered by Daimer®, visit www.daimer.com.

Pressure Washer Equipment — Advantages of Multi Gun Operations

2010-03-15T02:29:00.000-07:00

Pressure washer equipment with a multi-gun feature offers the ability to have multiple users clean at the same time. Daimer® retails industrial pressure washers that can be operated by up to three users simultaneously, when purchased with multi-gun operation. This advantage becomes clear if you think about productivity.
Simply stated, 2-3 people working at the same cleaning job can complete it 2-3 time faster. The multi-gun option has another advantage. The pressure washer function depends on the structure of the nozzle. The design of the nozzle decides the angle at which water strikes the surface. For different cleaning requirements, you need to use different nozzles. Single user pressure washer equipment does not allow the user to apply different nozzle functions simultaneously. This problem is solved when you invest in multi-gun pressure washer equipment where you can use 0°, 15º, 25º, 40º, or steam nozzles together.

Apart from multiple functions and users, the multi-gun pressure washer equipment also supports operations over large areas. Wide factory floors can be cleaned at different points simultaneously, speeding up the cleaning process. Find out more about multiple gun pressure washer equipment at www.daimer.com.

Pressure Washer Equipment-Agricultural Applications

2010-02-22T01:42:00.000-08:00

Pressure washer equipment is not only used in commercial and industrial settings, it is very handy for farmers and agricultural companies. Most farm equipment gathers soil, mud, and grease during the planting, threshing, winnowing, and gathering processes. Some equipment used for the basic processing of harvest also requires extensive and frequent cleaning to ensure proper functionality. Your choice of pressure washer equipment depends on the level of grime and the availability of electricity in the cleaning area.

Using Pressure Washer Equipment on Farms
A basic cold water machine is perfectly fine for most agricultural applications, where the high pressure levels (up to 5000 psi) compensate for lack of heat. Besides being lighter and cheaper, a cold water machine consumes less electricity or fuel. A good green chemical facilitates better cleaning. To avoid harm to bodies of water and land through runoff, use a plant based, eco-friendly detergent, such as the Eco-Green® line sold by Daimer®. Apply the solution a few minutes prior to cleaning. This allows for the softening of dirt and grease, which the spray of water will clear away. To further enhance the cleaning power, you may wish to consider a hot water or steam pressure washing system, as higher temperatures greatly increase cleaning proficiency.

In general, agricultural implements can withstand high pressure levels as they are made of solid metals. Be more careful with electronic or mechanical devices. If you are working outdoors, away from electricity sources, you should purchase gasoline or propane pressure washers. Find out how pressure washer equipment can help you maintain and increase the lifespan of your farm equipment by visiting www.daimer.com.

Using Pressure Washer Equipment for Public Areas

2010-02-01T21:15:00.001-08:00

The tough and durable construction of pressure washer equipment makes it suitable for cleaning public areas, including roads, parking lots, sidewalks, and building exteriors. Places like movie theaters, recreational facilities, stadiums, and parks are also places that can benefit from the use of pressure washing machines. Since these areas are often subject to tough deposits and stains, the strong cleaning power of these machines is well suited for difficult applications. Daimer®, a leading distributer of cleaning products, offers many types of pressure washer equipment for cleaning public areas.

For many, chewing gum removal is one of the toughest tasks when it comes to cleaning roads, sidewalks, and even benches. The line of KleenJet® GUM-EXTERMINATOR® steam cleaners by Daimer® use a combination of high steam temperatures, vacuum extraction, gum solution, and stainless steel brushes to rapidly remove chewing gum. However, for businesses that require the use of a pressure washer for other applications, Daimer's pressure washing systems can also be used to remove chewing gum. Working differently than steam celaners, pressure cleaners soften gum with high temperatures and blast the residues away with high pressure levels.

Graffiti removal is another tough job that can be accomplished through the use of a power pressure cleaner. When using pressure washing equipment to remove graffiti, it is important to ensure that the pressure levels will not damage the surface that needs to be cleaned. In many cases, adding an eco-friendly cleaning agent can increase the speed and effectiveness of the pressure washing machine. For this reason, Daimer® supplies Eco-Green® Graffiti Remover. This non-toxic, biodegradable solution contains lifters and emulsifiers to virtually raise graffiti right off the surfaces for quick and easy removal. More information about pressure washer equipment and other products is available at www.daimer.com.

How Green Chemicals Boost the Performance of Pressure Washer Equipment

2010-01-11T00:30:00.000-08:00

Even though pressure washer machines are some of the most powerful cleaning machines around, adding green chemicals can safely increase their effectiveness and efficiency.

Pressure washer equipment can provide an output pressure ranging from 500 psi to 8000 psi. The maximum output pressure varies for different models. The high output pressure of these machines blasts away various types of impurities, while high temperature levels can soften and dissolve residues. Green chemicals can be used with the pressure washer equipment to ensure that virtually residues are removed entirely.

The best green chemicals on the market fall within Daimer's Eco-Green® line. These environmentally safe substances are often more effective than chemical cleaning agents. Derived from plants and vegetables, they biodegrade quickly, do not harm the environment or the user, and do not leave behind any toxic traces.

With many specialized Eco-Green® formulas to choose from, Daimer® makes nearly every pressure washing task easier. For example, graffiti removal is made quick and easy with the use of a Super Max™ pressure washer and Eco-Green® Graffiti Removal. To remove stubborn rust stains from concrete, consider pairing Eco-Green® Concrete Cleaner with Rust Stain Remover with your pressure cleaner. Heavy-duty degreasing is another application that can benefit from this duo, combining a pressure cleaner with Eco-Green® Ultra-Power™ Degreaser.

Visit www.daimer.com to view the wide range of Eco-Green® chemicals and pressure washer systems.

Why Pressure Washer Equipment Are Used For Airplane Maintenance

2009-12-23T22:24:00.000-08:00

Pressure washer equipment is among the most powerful cleaning systems available today. However, that is not the only reason these devices are used for airplane maintenance. Safety of the airplane body, versatility of the machines, and efficiency are just a few of the many reasons why pressure washers are the cleaning machines of choice for aviation maintenance.

Output pressure level is the most obvious indicator of the power of pressure washer equipment. The pressure levels of these systems range from 500 psi to 8000 psi. Other indicators of power include the temperature level and the flow rate. Temperature levels range up to 330°F; the higher steam temperatures are suitable for the most challenging applications. Flow rates, the measure of water flow, vary from 0.5 GPM to 7 GPM; higher flow rates translate to greater power but also greater water wastage.

The latest models of pressure washer equipment from Daimer® offer the tri-mode facility. That means one can have cold water, hot water, or steam output, depending upon the nature of the surface and the cleaning application.

If properly used, these machines are safe for both the operators and the body of the airplane. However, it is important to select high quality machines that can withstand the demands of high pressure levels and temperatures to ensure user safety, like those in Daimer's Super Max™ line.

Pressure washer equipment can quickly remove almost all types of dirt and stains, including oil stains, bird splatters, chewing gum residues, blood stains, grease marks, and other types of impurities. To find the best pressure cleaning machines for aviation maintenance, consult Daimer®. Daimer® is one of the most sought-after suppliers of cleaning machines and green chemicals for virtually every application. Daimer®, one of the most sought-after suppliers of cleaning devices, provides the best pressure washer models at present. For more information on Daimer's pressure washers, visit www.daimer.com.

A Comparative Look at Wheeled and Trailer-Mountable Pressure Washers

2009-12-06T21:15:00.000-08:00

When purchasing pressure washer equipment for cleaning applications, one main aspect people look for is portability. This is especially true in the case of industrial cleaning jobs where vast areas are cleaned on a regular basis. There are two types of portable pressure washers available with wheeled configurations and trailer mountable models.

Wheel mounted machines from Daimer® feature components assembled into a compact design that can easily be mounted on a frame with wheels. This wheeled configuration enables you to push the pressure cleaner near the cleaning area.

Trailer-mountable versions of pressure washer equipment can be loaded onto skids or trucks, allowing the truck to transport the pressure washing machine to the area being cleaned. This is particularly beneficial in the case of heavy-duty pressure washers like the Super Max™ 12300. This 900 lb. unit, though available in a wheel-mounted configuration, can be difficult to move using wheels alone. However, since trailer-mounted models demand ample parking space for the truck adjacent to the area being cleaned, this pressure washer equipment is less versatile than ones with wheeled configurations.

Daimer®, the industry's leading provider of pressure washer equipment, offers nearly all of models in its extensive line of Super Max™ pressure washing machines in wheel-mounted or trailer-mounted configurations. To transform a machine like the Super Max™ 12300 from the wheeled configuration shown on www.daimer.com to a trailer mounted configuration, simply remove the wheels. To view more applications of such portable steam cleaner and pressure washer equipment, visit www.daimer.com.

How to Select Good Pressure Washer Equipment

2009-11-21T00:15:00.001-08:00

A quick search on the internet would reveal that several hundreds of brands and models of pressure washer equipment exist on the market. Most people find it hard to choose a good model from the plethora of options available.

The choice of a pressure washer ultimately depends on two things: cleaning requirements and the budget. For example, if one wants to purchase of pressure washer equipment for auto detailing, one must buy a device with a lower flow rate and a reasonably low output pressure rating.

On the other hand, if one wants pressure washer equipment for heavy duty cleaning applications such as industrial degreasing, one should opt for a device that can provide a very high output pressure and high steam temperatures. In addition, the cost of the machine should fit the budget as well.

Whatever the requirement, there is one name that you can trust. Daimer® has earned the reputation as a reliable supplier of cleaning equipment through years of dedicated service. The quality performance of Daimer® products is another factor that makes the brand a favorite with many cleaning professionals.

The company distributes over 600 models of pressure washer equipment through its Super Max™ series. The flow rates available vary from 0.5 GPM to 8 GPM and the output pressure levels vary from 500 psi to as high as 8000 psi. The flow rate and pressure ratings should vary based on the cleaning application.

To obtain more information and get all the details on various pressure washer equipment and other cleaning devices, visit www.daimer.com.

The Benefits of a Well-Equipped Pressure Washer

2009-11-05T22:02:00.000-08:00

The Super Max™ pressure washer equipment offered by Daimer® guarantees longevity and durability through the use of the highest quality components in its construction. With powerful heating coils, durable hoses, and a sturdy trigger gun, all these machines are built to last. This is one thing that is common in all models of pressure washer equipment offered by Daimer® is power.

With features like high flow rates and high pressure levels, these machines are also able to perform multi-gun operations. This allows more than one person to tackle a job at the same time, cutting down on overall time spent cleaning. You also have the option to select a high pressure washer with the right pressure level and flow rate for your specific application. For example, for auto detailing, pressure washers with flow rates as low as 0.5 GPM are available to clean without damaging the vehicle’s body.

For industrial and commercial use, you can choose a pressure washer with flow rates of up to 7 GPM and pressure levels of up to 7000 psi. Whether you are using these machines for industrial applications or for lighter applications, things become much more convenient and safer because of the multi-gun feature that nearly all models can be purchased with.

To learn more about pressure washer equipment and multi-gun features offered by Daimer®, visit www.daimer.com.

Pressure Washer Equipment for Outdoor Applications

2009-10-23T03:06:00.000-07:00

Pressure washer equipment that can be mounted on a truck or a vehicle is ideal for cleaning agricultural devices and other outdoor cleaning applications. If you check a store that sells cleaning equipment or search the internet, you will find that there are a number of brands that provide portable truck-mounted pressure washer equipment. However, you have to consider several factors before selecting a portable pressure washer.

The first factor is the source of energy. If you are looking for a device for outdoor cleaning applications, you need to select a machine that has propane or gasoline as the source of power. The reason for this is that electrical outlets may not accessible in outdoor settings.

Generally, the main things people consider while selecting pressure washer equipment are temperature levels, pressure ratings, and flow rate. For demanding cleaning applications, high pressure levels and flow rates are preferable, along with hot water or steam temperatures for advanced cleaning capabilities.

At present, Daimer®, a reputable supplier of cleaning machines, has the most powerful devices. Some of the latest models in the Super Max™ series by Daimer® can provide a pressure as high as 7000 psi. One can find pressure washer equipment that can be mounted on a truck or a trailer in the Super Max™ 6000, 7000, 8700, 9000, and 12000 series. Almost all of these devices are tri-mode. This means the devices can produce all three types of output — cold water, hot water, and steam.

For further details on pressure washer equipment, feel free to visit www.daimer.com.

Using Pressure Washer Equipment For Easy Graffiti Removal

2009-10-05T03:15:00.001-07:00

Removing graffiti can be a tiresome task, since the canvas is usually a porous concrete wall that quickly absorbs spray paint. Once spray paint is absorbed by walls, it becomes difficult to clean it off. Although there are many methods to remove graffiti, combining high pressure levels with effective chemicals is the most effective.

Pressure washer equipment boasts varied temperature levels, high flow rates, and high pressure levels that work together to dissolve and blast away stains and other residues. When selecting pressure washer equipment for graffiti removal applications, it is important to select high quality machines, like Daimer’s Super Max™ 8720.

The Super Max™ 8720 is an electric pressure washer capable of reaching a flow rate of 4 GPM and high pressure levels of up to 2000 psi. The well-built construction and high-quality components make it the perfect solution for troublesome pressure cleaning jobs as well as wet sandblasting tasks.

To enhance the graffiti removal of pressure washing machines, many operators choose to utilize chemicals. However, not just any chemical will due. Green chemicals specifically designed for graffiti removal, like Eco-Green® Graffiti Remover, are the best choice. Eco-Green® Graffiti Remover is plant-based, readily biodegradable, and non-toxic. In addition to being safe for this environment, this effective formula breaks down the paint molecules and emulsifies them in water, rending graffiti easy to blast off with a pressure washer.

Check out more models of innovative pressure washer equipment at www.daimer.com.

Choosing the Right Pressure Washer Equipment for Your Needs

2009-07-31T05:55:00.000-07:00

Pressure washer equipment offers high pressure levels and flow rates to tackle even the most challenging cleaning tasks in residential, commercial and industrial settings. Today, there are several varieties of pressure washers available for specific cleaning requirements.

Daimer® - a leading supplier of advanced cleaning machines – offers Super Max™ pressure washer equipment. In addition to different models of hot water, cold water and steam pressure washing machines, the Super Max® series also offers pressure cleaners with triple-function capabilities.

Cold water equipment such as the Super Max® 8900C-322 is ideal for light cleaning jobs that can be accomplished without the use of hot water or steam. These pressure washers do not use fuel and are compact and light-weight.

By combining the power of highly pressurized water with intense heat, hot water pressure washer equipment creates a fantastic cleaning force that can eliminate grease, grime and tough stains from a wide range of surfaces.

The combination of super-heated steam (up to 330°F) and high pressure levels puts steam pressure washer equipment among the most powerful cleaning forces on the market. By readily dissolving substances, these steam machines greatly speed up the removal of the heaviest grease and other deposits.

Tri-mode pressure washers combine all three of the above-mentioned versions into a single unit. The Super Max® 9000 is a popular tri-mode pressure washer that can generate steam temperatures of up to 330ºF, hot water temperatures of up to 250ºF and pressure levels of about 150 PSI.
To transform even the dirtiest surfaces into clean and safe areas, check out the extensive range of cleaning machines at www.daimer.com.Click here for pressure washers video.

Benefits of Propane Pressure Washers

2009-06-29T23:50:00.000-07:00

Indoor cleaning applications are best tackled with electric pressure washing machines. However, when you need to use equipment pressure washer in areas where an electrical supply may not be available, then it is best to choose fuel-powered models, like those that run on propane.

The Super Max™ range of propane-powered pressure washing equipment from Daimer® is the perfect combination of power, mobility and versatility. With amazing pressure levels of 3000 PSI and a high flow rate of 5 GPM, the Super Max™ 12500 PE pressure washer offers unmatched cleaning power to handle the toughest degreasing and pressure cleaning tasks.

A propane-powered pressure washer offers great mobility since it does not have to be attached to an electrical outlet. This is especially beneficial when it comes to cleaning large industrial areas. Additionally, these units are ideal for those users who require mobility, but prefer the use of propane over gasoline. The versatile nature of these pressure cleaners is further enhanced by their triple-function capabilities. To enable you to manage all kinds of cleaning jobs, propane powered pressure washer equipment is independently capable of functioning as a hot water pressure cleaner, cold water pressure cleaner and steam pressure cleaner.

The durable construction of Super Max™ pressure washing equipment is on par with its superior technologies. Every machine is ruggedly built with components of the highest quality, from the stainless steel, powder-coated housing to the heavy-duty heating coils. In addition to its quality, the Super Max™ 12500 PE pressure washer is highly versatile, suitable for use on various surfaces, including concrete, stone, stainless steel, brick, tile and aluminum.

To purchase advanced, effective and affordable pressure washer equipment powered by propane, visit www.daimer.com.

Super Max ® 8730 WS – For Pressure Washing With Wet Sandblasting

2009-06-01T03:55:00.000-07:00

Unlike traditional pressure cleaners that were solely intended for cleaning purposes, newer models of pressure washer equipment feature lots of additional capabilities like wet sandblasting. The Super Max® 8730 WS from Daimer® is one such example of an innovative pressure cleaner that includes the function of wet sandblasting.

To begin with, the Super Max® 8730 WS is a cold water pressure washer plus wet sandblaster. Pressure levels of up to 2500 psi and high flow rate of 4 GPM make this electric pressure washer the perfect choice for those applications that demand mobility with powerful capabilities of wet sandblasting.

Now let us take a look at the outstanding wet sandblasting system of this powerful pressure washer. Unlike other pressure cleaners that simply remove contaminants from metal surfaces, the Super Max® 8730 WS is able to blast off layers of paint, rust, corrosion and other heavy deposits from metallic surfaces. In fact, this wet sandblaster system is so effective that it amazingly cleans off all traces of deposits and reveals the bare metal. Best of all, this pressure cleaner is compatible with sand grit of varying sizes, plastic pellets and baking soda.

In addition to being trailer-mountable and portable, the Super Max® 8730 WS pressure washer are also available with two gun operations for extra versatility. If you are on the lookout for an affordable and reliable pressure washer with added capabilities of wet sandblasting, the right place to turn to is www.daimer.com.

Pressure Washer Equipments – For Fast And Easy Pre-Treatment Of Metal Surfaces

2009-04-30T04:41:00.001-07:00

Pressure washer equipment or power washers are advanced cleaning machines that utilize the power of highly-pressurized water for amazing cleaning capabilities. Often, simple scrubbing is not enough to clean off dirt, grease and paint from metal surfaces. Only pressure washing machines can successfully tackle such demanding cleaning applications.

A pressure washing machine can be classified into various types like diesel/gasoline-based, electric and hydraulic. They may also be divided into cold or hot pressure washer models. Today, some of the best models of power washers come from Daimer®.

For instance, the Super Max® 15800 AF – a powerful, electric, tri-mode pressure washer is capable of attaining a high pressure of up to 2000 psi while maintaining a low flow rate of up to 4 GPM. These stationary machines can be used individually as steam pressure washer, hot water pressure washer and cold water pressure washer.

The Super Max® 15800 AF machines use a downstream injection style of phosphatizing system for pre-treating metal surfaces. This way, the chemical comes in contact with only minimum areas of the metal surfaces, thus preventing corrosion. This cleaning system is perfect for pre-treating metals before applying powder coating or paint primer.

Like all products from Daimer®, the Super Max® 15800 AF is also made from the highest grade stainless steel components. More exciting models are available at www.daimer.com.

Super Max 8900C-322 WS

2009-04-20T03:22:00.000-07:00

When it comes to choosing a pressure washer that features power, portability, and durability, Daimer ® is your source. In fact, Daimer ® offers over 600 of the most robust and versatile pressure washer models in the industry. One such machine is the Super Max ® 8900C-322 WS cold water pressure washer.

Unlike other cold water machines, the 8900C-322 WS features Daimer®’s exclusive wet sandblaster kit. Wet sandblasting pressure washing equipment effectively forces sand grit or other media across surfaces at high pressures to actually remove layers of material from the surface. Daimer ® is concerned with the health of its customers. That’s why Daimer®’s Super Max ® 8900C-322 WS uses wet sandblasting as opposed to compressed air sandblasting; as wet sandblasting is a much safer method which does not require the operator to wear a protective suit.

This powerful wet sandblaster pressure washer works like this. First the machine draws sand into the system through the metal sandpoint. Then the sand is carried through a flexible pickup tube into a specialized venturi head where it is mixed with water. The sand and water mix then exits the pressure washer through the nozzle at a high pressure level of 2000 psi. To add versatility to this powerful process, Daimer®’s machine can be used with a wide variety of sand and media sizes.

Sandblasting is often an essential task in commercial and industrial facilities. For these users, Daimer®’s Super Max ® 8900C-322 WS pressure washer is the solution. Learn more about the machine at www.daimer.com.